Dante PoE powered speaker system
The VXL1B-16P and VXL1W-16P support the "Dante" audio network, and use a slim line-array configuration, making them an easy fit perfectly for conference rooms (in the size range of 12m × 10m) that demand vocal clarity while imposing numerous constraints on space, and require both functionality and a sense of design. With audio distributed via a Dante network and PoE power* supplied from a PoE compliant L2 switch, the speaker system can be constructed as a network, allowing existing IT infrastructure to be effectively utilized. Simple wiring via LAN cables, easy installation, and no need for a power amp contribute to the flexibility of installation, allowing you to construct an elegant sound system that will not interfere with the design of the conference room.
* When using an IEEE802.3at compliant PoE power supply device, the maximum speaker output is 15W; when using an IEEE802.3af compliant PoE power supply device, the maximum speaker output is 6W.
Dante PoE powered speaker system
With audio distributed via a Dante network and PoE power* supplied from a PoE compliant L2 switch, the speaker system can be constructed as a network, allowing existing IT infrastructure to be effectively utilized. Simple wiring via LAN cables, easy installation, and no need for a power amp contribute to the flexibility of installation, allowing you to construct an elegant sound system that will not interfere with the design of the conference room.
* When using an IEEE802.3at compliant PoE power supply device, the maximum speaker output is 15W; when using an IEEE802.3af compliant PoE power supply device, the maximum speaker output is 6W.
Sound quality and design to match conference room requirements
The VXL1-16P is equipped with 16 drivers. A line array configuration is used, placing the audio sources linearly to reduce sound dispersion in the vertical direction, thereby limiting reflections from the ceiling and walls, and preventing sound energy from being dispersed, ensuring that clear sound can be delivered to long distance. The drivers are 3.75 cm (1.5 inch) full-range units that extravagantly use neodymium magnets, and are placed in a slim enclosure (chassis) that is 5.4 cm wide. This allows easy installation even in locations that have various limitations on placement space, without impairing the décor of the office conference room.
Flexible Installation Options
In addition to the supplied wall-mount brackets, a comprehensive range of optional hardware is available for convenient system mounting and setup in just about any environment. In addition to the WMB-L1 wall mount bracket with vertical and horizontal angle adjustment capability, HCB-L1 bracket for horizontal speaker coupling, and PA-L1B pole mount adaptor is suitable for pole diameter of 35 mm.
VXL1W-16P with included bracket
VXL1W-16P with PA-L1B (A pole is not included)
VXL1W-16P with WMB-L1
HCB-L1B used in common with WMBL1 (Left), HCB-L1B used in common with PA-L1B (Right)
Wireless control on iPad
This product can be remotely controlled from a "ProVisionaire Touch" custom control panel for the iPad via a Wi-Fi network. For example, operations such as adjusting the volume balance of conference audio that's input to an MRX7-D signal processor and raising the speaker volume can be performed from a single screen of an iPad.
- Speaker type Full-range, powered speaker, bass reflex
- Frequency range (-10dB) 80Hz - 20kHz *1
- Nominal coverage H 170°
- V 25° (+12.5° - -12.5°)
- Effective coverage (-10dB) H 180°
- V 30° (+15° - -15°)
- Components LF-HF 1.5"(3.75cm) Cone x 16
- Maximum output level (1m; on axis) 102 dB SPL (when using PoE+(IEEE 802.3at)) *2
- Power rating Dynamic 15W (PoE+ (IEEE 802.3 at)), 6W (PoE (IEEE 802.3 af))
- Continuous 15W (PoE+ (IEEE 802.3 at)), 6W (PoE (IEEE 802.3 af))
- I/O connectors RJ-45 (Dante) x1
- Protection circuit Speaker processing Clip limiting, Integral power protection
- Amplifier protection Over current protection, Over temperature protection, Under voltage lock out, DC detection, Clock detection
- Power supply protection Over load protection, Over voltage protection, Under voltage lock out
- Cooling Natural convection
- Power requirements PoE+(IEEE 802.3at), PoE(IEEE 802.3af)
- Power consumption Idle: 3W, 1/8(Pink Noise): 6W (PoE+(IEEE 802.3at)), 4.3W (PoE(IEEE 802.3af))
- Finish VXL1B-16P: Black painting (approximate value: Munsell N3.0), VXL1W-16P: White painting (approximate value: Munsell N9.0)
- Magnetic shielding No
- Dust and water resistant No
- Accessories Mounting bracket x2, Bracket base x2, Safety wire x1, Machine screws (M5x10) x2, Template x1, Owner's manual
- Options WMB-L1B (W), HCB-L1B, PA-L1B
- Packaging Packaged in 1 pc
- Dimensions (W x H x D) W54 x H1120 x D104 mm (Speaker only)
- Weight 5.0kg (Speaker only)