Optimal Audio Up 60

Optimal Audio Up 60
Enlarge
Up-6O-Front-No-Grill-Cutout.pngUp-6O-Side-Cutout.png

Optimal Audio Up 60

Code: UP6OW
Stock: 3

Optimal Audio UP6W

  • 6” Coaxial Driver
  • Discreet size without back can
  • Unobtrusive Design
  • 16 ohm or 70/100V line operation
  • Wide Conical Coverage Pattern
  • Integrated Mounting Hardware

Product Description
Product specification

Up 6O is a discreet 6” ceiling speaker delivering consistent coverage and crisp, clear sound to a wide range of cost conscious, commercial environments from hotels and concourses to retail outlets, bars and restaurants.

Up 6O is supplied without a back can for ceilings with a minimum cavity depth, while an integral fixing system is included to achieve a simple and clean installation. The steel perforated grille is finished in neutral white.

Up 6O features a 6” (162mm) low frequency driver paired with a 0.7” (20mm) metal dome tweeter. It is suitable for both high quality speech and music reproduction. A conical 110° coverage pattern delivers consistent, high performance sound where it needs to go.

Each Up 6O can be run on a series of 70 or 100 Volt taps or at low impedance. The 16 ohm setting allows up to four units to be connected to each amplifier channel at low impedance. Tap selection is via a rotary switch behind the removable grille.

A SmartAmp or powered Zone will provide amplification, optimal sound performance and loudspeaker protection via onboard presets. When teamed with Zone and WebApp, system set up and end user control is effortless, and can be further supplemented by ZonePad.


Specifications

  • TYPE Two-way, full range, passive, ceiling speaker
  • FREQUENCY RESPONSE (with preset)
  • 65Hz to 18kHz ±3dB
  • -10dB @ 50Hz
  • DRIVERS
  • LF: 6.5” (162mm), Coated paper
  • HF: 1” (25mm) exit/ 0.7” (20mm) Metal dome
  • RATED POWER 60W (AES) 120W (Peak)
  • NOMINAL IMPEDANCE 16
  • SENSITIVITY (1W/1m) 90dB
  • MAXIMUM SPL 108dB (cont), 111dB (peak)
  • CROSSOVER 2.7kHz passive
  • RECOMMENDED HIGH-PASS FILTER 24dB/octave @ 60Hz
  • TRANSFORMER TAPS @ 70V 60, 30, 15, 7.5W
  • TRANSFORMER TAPS @ 100V 60, 30, 15W
  • DISPERSION (-6dB) 110 conical
  • BACK CAN N/A
  • BAFFLE ABS
  • PROTECTIVE GRILLE Perforated steel
  • FIRE RATING UL94-V0
  • CONNECTORS 4 Pin Euroblock with link out
  • FITTINGS C-ring support backing plate
  • DIMENSIONS (inc. Grille)
  • (Ø) 251mm x (D)103.5mm
  • (Ø) 9.88” x (D) 4.1”
  • CUT-OUT DIAMETER
  • 222mm (8.74”)
  • WEIGHT
  • 2.24kg (4.94lb)
Your basket is empty