Up 4S is a discreet, two-way, passive 4” speaker delivering consistent coverage and full frequency sound to a wide range of cost conscious, commercial environments from hotels and concourses to retail outlets, bars and restaurants.
Up 4S features a 4” (105mm) low frequency driver paired with a 0.7” (20mm) silk dome tweeter. It is suitable for both high quality speech and music reproduction.
The wide 150° conical coverage of Up 4S makes it particularly suitable for low ceilings and reduces the number of speakers required for even coverage leading to a reduction in installation cost. A shallow steel back can allows installation in ceilings with minimal cavity depth. An integral fixing system is included to achieve a simple and clean installation. Up 4S has a steel back, perforated steel grille and finished in neutral white.
Each Up 4S can be run on a series of 70 or 100 Volt taps or at low impedance. Tap selection is via a rotary switch behind the removable grille.
A SmartAmp or powered Zone will provide amplification, optimal sound performance and loudspeaker protection via presets. When coupled with a Zone and WebApp, system set up and end user control is straight forward, and can be further supplemented by ZonePad wall controllers.
Specifications
- TYPE Two-way, full range, passive, ceiling speaker
- FREQUENCY RESPONSE (with preset) 110Hz – 18kHz ± 3dB
- -10dB @ 85Hz
- DRIVERS LF: 4” (105mm), Polypropylene injection moulded
- HF: 0.7 (20mm) Silk Dome
- RATED POWER 15W (AES) 30W (Peak)
- NOMINAL IMPEDANCE 8
- SENSITIVITY (1W/1m) 86dB
- MAXIMUM SPL 98dB (cont), 101dB (peak)
- CROSSOVER 3.5kHz passive
- RECOMMENDED HIGH-PASS FILTER 24dB/octave @ 85Hz
- TRANSFORMER TAPS @ 70V 8,4,2,1,0.5W
- TRANSFORMER TAPS @ 100V 8,4,2,1W
- DISPERSION (-6dB) 150 conical
- BACK CAN Zinc-plated Steel
- BAFFLE ABS
- PROTECTIVE GRILLE Perforated steel with cloth backing
- UL94-V0 UL94-5VB
- CONNECTORS 4 Pin Euroblock with link out
- FITTINGS C-ring support backing plate
- DIMENSIONS (inc. Grille)
- (Ø) 202mm x (D) 144mm
- (Ø) 7.95” x (D) 5.67”
- CUT-OUT DIAMETER
- 178mm (7.01”)
- WEIGHT 2.2kg (4.9lbs)